|
SLP5-6D
Singlemode Loss Test Kit
with Wave ID, Set Reference, and Data Storage
The Noyes
SLP5-6D test kit combines the OPM5-4D optical power meter and
OLS2-Dual LASER light source and is ideally suited for testing
single-mode fiber optic networks.
The OLS2-Dual features 1310 nm and 1550 nm LASER output from a
single output port and is easy to operate. The LASER output is
stabilized to ensure accurate test results per current TIA/EIA
requirements. This light source offers 4 modes of operation: Dual
wavelengths sending ID, single wavelength sending ID, CW, and
modulated Tone. [Active Output], [Tone], [Battery], and [External
Power] indicators identify the currently enabled operating mode,
battery charge status, and external power presence. The output port
is equipped with a removable SC (FC & ST available) adapter to allow
the output connector to be inspected and cleaned.
The OPM5-4D offers Wave ID, automatic wavelength identification and
switching, when used with the OLS2-Dual light source. Multiple test
Tone detection is provided for fiber identification. The OPM5-4D
stores optical references for each calibrated wavelength. An easy to
read Dual Wavelength LCD display with Backlight shows measured power
[dBm or μW] or insertion loss [dB], calibrated wavelengths, tone
signal [Hz], wavelength ID, and the battery charge status. Up to 500
records per wavelength of power or insertion loss measurements may
be stored in internal non-volatile memory.
Using the supplied Windows® compatible software and USB connection,
test records may be transferred to a PC for storage, display,
analysis, and printing.
In addition to being powered by two AA alkaline, the OPM5-4D or
OLS2-Dual can be powered by optional AC adapter and/or rechargeable
NiMH battery pack.
The OPM5-4D optical input port accepts Noyes thread-on style adapter
caps. Adapter caps are required for operation and must be ordered
separately.
The OPM5-4D and OLS2-Dual are fully N.I.S.T. traceable. |
Features
- Rugged, handheld, lightweight
- Designed for field use
- Certify singlemode fiber links
per TIA/EIA standards
- Wave ID - automatic wavelength
identification and switching
- Dual Wave ID, single Wave ID,
CW, and modulated Tone (on singlemode output)
- 270 Hz, 330 Hz, 1 kHz, and 2 kHz
Tone
- Adjustable output
- Large LCD with Backlight
- Power measurements in dBm or µW;
insertion loss in dB
- Reference power level storage
- Up to 500 test records storage
per wavelength
- USB port for download of stored
records
- AA alkaline, optional
rechargeable NiMH battery pack or AC adapter
- Low battery indicator
- Free Windows® compatible
software to view, print, and archive test results
- Cost-effective, easy to use
- N.I.S.T. traceable
Specifications & Ordering Information
|
 |
