Phone: 717-859-1606
sales@prepcoproducts.com

Fiber Optic Loss Test Kit

SLP4-7 Triple Wave Test Kit with Wave ID and  Set Reference

The Noyes triple wavelength single-mode test kits are available in two models, SLP4-7 or SLP4-FTTH. The SLP4-7 and SLP4-FTTH model combine the OPM4-4D optical power meter and either OLS7-3 (1310/1550/1625 nm) or OLS7-FTTH (1310/1490/1550 nm) LASER source respectively.

The OLS7 features triple wavelength LASER output from a single output port and is easy to operate. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements. Each wavelength may be transmitted individually at CW or with tone modulation at frequencies of 270Hz, 330Hz, 1kHz and 2kHz. Also, each wavelength may be transmitted with Wave ID. When transmitting with Wave ID, the OLS7 will also support transmitting pairs of wavelengths in an alternating pattern and triple wavelengths in a sequential pattern. The OLS7 output port is equipped with a UCI based removable adapter to allow the output connector to be inspected and cleaned.

The OPM4-4D offers Wave ID, automatic wavelength identification and switching, when used with the OLS7. Multiple test Tone detection is provided for fiber identification. The OPM4-4D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. The OPM4-4D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately.

In addition to being powered by two AA alkaline, the OPM4-4D or OLS7 can be powered by optional AC adapter and/or rechargeable NiMH battery pack.
The OPM4-4D and OLS7 are fully N.I.S.T. traceable.

• Rugged, handheld, lightweight
• Designed for field use
• Wave ID - automatic wavelength identification and switching
• Triple Wave ID, Dual Wave ID, single Wave ID, CW, and modulated Tone
• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
• Large LCD with Backlight
• Power measurements in dBm or µW; insertion loss in dB
• Reference power level storage
• AA alkaline, optional rechargeable NiMH battery pack or AC adapter
• Low battery indicator
• Cost-effective, easy to use
• N.I.S.T. traceable

Applications

• Passive Optical Networks (PON) testing
• Certify singlemode links per TIA/EIA standards
• Modulation Tone for fiber identification to isolate specific fibers
  in a bundle prior to splicing or rerouting

Specifications & Ordering Information

• View PDF

Some Demonstration & Refurbished Models available - Please call for pricing.

Quantity Discounts available - Please call for pricing.

1358 Beaconfield Lane • Lancaster, PA 17601

Phone: 717-859-1606

Fax: 717-859-6646

eMail: sales@prepcoproducts.com

Table of Contents

Home