|
SLP4-6D
Singlemode Loss Test Kit with Wave ID and Set Reference
The Noyes SLP4-6D test kit combines the
OPM4-4D optical power meter and OLS2-Dual LASER light source and is
ideally suited for testing single-mode fiber optic networks.
The OLS2-Dual features 1310 nm and 1550 nm LASER output from a
single output port and is easy to operate. The LASER output is
stabilized to ensure accurate test results per current TIA/EIA
requirements. This light source offers 4 modes of operation: Dual
wavelengths sending ID, single wavelength sending ID, CW, and
modulated Tone. [Active Output], [Tone], [Battery], and [External
Power] indicators identify the currently enabled operating mode,
battery charge status, and external power presence. The output port
is equipped with a removable SC (FC & ST available) adapter to allow
the output connector to be inspected and cleaned.
The OPM4-4D offers Wave ID, automatic wavelength identification and
switching, when used with the OLS2-Dual. Multiple test Tone
detection is provided for fiber identification. The OPM4-4D stores
optical references for each calibrated wavelength. An easy to read
Dual Wavelength LCD display with Backlight shows measured power [dBm
or μW] or insertion loss [dB], calibrated wavelengths, tone signal
[Hz], wavelength ID, and the battery charge status.
In addition to being powered by two AA alkaline, the OPM4-4D or
OLS2-Dual can be powered by optional AC adapter and/or rechargeable
NiMH battery pack.
The OPM4-4D optical input port accepts Noyes thread-on style adapter
caps. Adapter caps are required for operation and must be ordered
separately.
The OPM4-4D and OLS2-Dual are fully N.I.S.T. traceable. |
Features
- Rugged, handheld, lightweight
- Designed for field use
- Certify singlemode fiber links
per TIA/EIA standards
- Wave ID - automatic wavelength
identification and switching
- Dual Wave ID, single Wave ID, CW,
and modulated Tone (on singlemode output)
- 270 Hz, 330 Hz, 1 kHZ, and 2 kHz
Tone
- Adjustable output
- Large LCD with Backlight
- Power measurements in dBm or µW;
insertion loss in dB
- Reference power level storage
- AA alkaline, optional
rechargeable NiMH battery pack or AC adapter
- Low battery indicator
- Cost-effective, easy to use
- N.I.S.T. traceable
Specifications & Ordering Information
|
 |
