|
MLP4-2 Multimode Loss Test Kit
with Wave ID and Set Reference
The Noyes
MLP4-2 test kit combines the
OPM4-2D optical power meter and OLS1-Dual LED light source and is
ideally suited for testing multimode fiber optic networks.
The OLS1-Dual features 850 nm and 1300 nm LED output from a single
output port and is easy to operate with only a power button and a
wavelength select button. The LED output is stabilized to ensure
accurate test results per current TIA/EIA requirements. This light
source offers 3 modes of operation: Dual wavelengths sending ID,
single wavelength sending ID, and CW. [Active Output], [Battery],
and [External Power] indicators identify the currently enabled
operating mode, battery charge status, and external power presence.
The output port is equipped with a removable SC (FC & ST available)
adapter to allow the output connector to be inspected and cleaned.
The OPM4-2D offers Wave ID, automatic wavelength identification and
switching, when used with the OLS1-Dual. Multiple test Tone
detection is provided for fiber identification. The OPM4-2D stores
optical references for each calibrated wavelength. An easy to read
Dual Wavelength LCD display with Backlight shows measured power [dBm
or μW] or insertion loss [dB], calibrated wavelengths, tone signal
[Hz], wavelength ID, and the battery charge status.
In addition to being powered by two AA alkaline, the OPM4-2D or
OLS1-Dual can be powered by optional AC adapter and/or rechargeable
NiMH battery pack.
The OPM4-2D optical input port accepts Noyes thread-on style adapter
caps. Adapter caps are required for operation and must be ordered
separately.
The OPM4-2D and OLS1-Dual are fully N.I.S.T. traceable. |
Features
- Rugged, handheld, lightweight
- Designed for field use
- Certify multimode fiber links
per TIA/EIA standards
- Wave ID - automatic wavelength
identification and switching
- Dual Wave ID, single Wave ID,
and CW
- Large LCD with Backlight
- Power measurements in dBm or µW;
insertion loss in dB
- Reference power level storage
- AA alkaline, optional
rechargeable NiMH battery pack or AC adapter
- Low battery indicator
- Free 50 µm and 62.5 µm mandrels
- Cost-effective, easy to use
- N.I.S.T. traceable
Specifications & Ordering Information
|
 |
